Tune-up Reports and Custom work done here at BellsCB: This is a playlist and has multiple videos  (notice the   button to change to the next video)

Galaxy radios sometimes have a small scratch or ding that the factory covers with black touch up.  We cannot effect this and do not guarantee your radio to be cosmetically perfect.  Bells CB will make no marks or scratches on your radio ourselves.  Galaxy might though and I cannot control it. 

Optional Accessories
	Tune-up. Perform a tune-up and alignment to the radio to increase power, audio and Performance	$49
	Perform Receiver improvement mods. (These mods replace key RX parts for better sensitivity and selectivity)	$26
	Install an CP-1 Top Gun Audio Compressor. (on - all the time) Is most noticed on SSB, This amplifies your lower level audio on transmit. NOTE: It becomes difficult to use the Talkback even at low volume with this mod.	$25
	Change factory power cord to a 10 Gauge Power Cord (14 foot) and modify the DC Jack for high amperage 2 Pin Quick connector. A 10,000uF Capacitor is also added for additional DC filtering. This is only helpful when you have the RFX-95HD2 and is NOT required for a stock radio	$59
	Tune-up and frequency conversion. OPTION (Install extra channels with switches in back of radio and tune up radios output)	$79
Slider Option NO freq mod $35 W/ freq mod $15	Clarifier "Slider" conversion. (Modify the Clarifier to control TX and RX frequency. This mod is an add-on to the two frequency conversion mods listed above and if done separately will cost $35)	$35 or $15
Switch Location None $49 Back $59 Side $69	Install an EXTERNAL PTT keying port. We use an RCA jack for a TX output PORT to your external device. Every time you key it provides a connection between the +/- of the RCA connector.    1) Output RCA completely isolated  from the radio. Both +/-  connect to a relay that isolates it from the radios circuits.    2) Optional BYPASS switch in case your external device does not have a standby (turns port off (stays open))      4) Heavy duty relay can handle any keying circuit voltage, even the SB-220's - 120VDC circuit.	$49 / $59 / $69
	Turner RK-56 Noise Canceling microphone. (wired for this radio with a 4 pin plug)	$46
	Astatic 636L Noise Canceling microphone. (wired for this radio with a 4 pin plug)	$34
	Astatic RD104-E Amplified microphone. (wired for this radio with a 4 pin plug and a battery installed)	$46
	Astatic D104M6B Amplified microphone. (wired for this radio with a 4 pin plug and a battery installed)	$59
	Install an Echo Board (Side) (wired internal to the radio with dual controls on the left side to control speed and echo effects)	$75
	Install an Echo Board (Front) (with dual controls on the front in the Talkback location. Talkback control is cut free of the dimmer board and moved to the side.)	$89
	Install a Record/Playback Module 120 seconds (wired inside the radio with  a switch on the side to record 120 seconds and to play it back)	$77
Sound Byte link	Install a Noise toy (wired inside the radio with a switch or pushbutton to trigger any 30 second sound byte you want)	$65
Sound Byte link SOLD OUT	Install a Noise toy as a background theme music (wired inside the radio with a switch to play any background music at very low volume so you can talk over it.)	$65
	Add a Small External Speaker (plugs into back of the radio for improved sound)	$12
	Add a Large External Speaker (plugs into back of the radio for improved sound)	$25
Colors Blue Red Green Amber	Install Star-Bryte Knobs with dimmer control integration circuit built so it dims with the factory adjustment. 8 Knob set parts and labor.	$248
	Exchange the top and bottom covers to Chrome Covers.	$32
	Exchange the top and bottom covers to Diamond Plate Covers.	$22
	Add a table top stand to run this as a Base Station in the house.	$25
	Add a power Supply to run this as a Base Station in the house.	$89
	Add a power Supply and speaker and fan to run this as a Base Station in the house.	$159